add WIO file

Projet.ino

@@ -0,0 +1,87 @@
+#include "TFT_eSPI.h"
+#include"LIS3DHTR.h"
+
+TFT_eSPI tft;
+LIS3DHTR<TwoWire> lis;
+
+
+unsigned int tabPiecesNov[5][2]={{150, 150}, {2, 15}, {100, 5}, {45, 120}, {30, 20}},
+tabPiecesCon[5][2]={{4, 35}, {2, 15}, {100, 5}, {45, 120}, {450, 120}},
+tabPiecesExp[5][2]={{4, 35}, {2, 15}, {100, 5}, {45, 120}, {450, 120}};
+
+
+unsigned int x=100;
+unsigned int y=100;
+const unsigned int rayonBoule = 7, rayonPiece = 5;
+const unsigned int vitesse = 8;
+
+const unsigned int xMax = 307;
+const unsigned int yMax = 226;
+
+bool start = false;
+
+
+void setup() {
+  tft.begin();
+  tft.setRotation(3); // (0,0) à l'oppossé du joyssitck
+  tft.fillScreen(TFT_DARKGREY); // fond blanc
+
+  Serial.begin(115200);
+  pinMode(WIO_BUZZER, OUTPUT);
+
+  tft.setTextColor(TFT_BLACK);
+
+  tft.fillCircle(x, y, rayonBoule, TFT_RED);
+ 
+  pinMode(WIO_KEY_C, INPUT_PULLUP);
+  tft.fillRect(0,0,320,40,TFT_BLUE); 
+  tft.drawString("Mode 1", 10, 10); //prints strings from (10, 10)
+
+  lis.begin(Wire1); 
+  lis.setOutputDataRate(LIS3DHTR_DATARATE_25HZ); // Setting output data rage to 25Hz, can be set up tp 5kHz 
+  lis.setFullScaleRange(LIS3DHTR_RANGE_2G); // Setting scale range to 2g, select from 2,4,8,16g
+
+  // attachInterrupt(0, depart, FALLING);
+}
+
+void afficherPiece(int posTab) {
+  tft.fillCircle(tabPiecesNov[posTab][0], tabPiecesNov[posTab][1],rayonPiece,TFT_YELLOW);
+  tft.drawCircle(tabPiecesNov[posTab][0], tabPiecesNov[posTab][1],rayonPiece,TFT_BLACK);
+  tft.drawString("$", (tabPiecesNov[posTab][0] - 2), (tabPiecesNov[posTab][1] - 3));
+}
+
+// void depart() {
+//   tft.drawString("3", 100, 100); //prints strings from (10, 10)
+//   delay(1000);
+//   tft.drawString("2", 100, 100); //prints strings from (10, 10)
+//   delay(1000);
+//   tft.drawNumber("1", 100, 100); //prints strings from (10, 10)
+//   delay(1000);
+//   tft.drawString("GO", 100, 100); //prints strings from (10, 10)
+//   analogWrite(WIO_BUZZER, 128);
+//   delay(1000);
+//   analogWrite(WIO_BUZZER, 0);
+//   go = millis();
+// }
+
+void Giroscope() {
+  float x_values, y_values ;
+  x_values = lis.getAccelerationX();
+  y_values = lis.getAccelerationY();
+
+  if(y>yMax || y<(rayonBoule+40) || x>xMax || x<rayonBoule) return;
+
+  tft.fillCircle(x, y, rayonBoule, TFT_DARKGREY);
+  y = y + (x_values*vitesse);
+  x = x - (y_values*vitesse);
+  tft.fillCircle(x, y, rayonBoule, TFT_RED);
+}
+
+void loop() {
+
+  if(digitalRead(WIO_KEY_C) == LOW) start = true;
+
+  while(!start) {
+    tft.drawNumber(10, 115, 115);
+  }
+}